The portable busbar machine has the advantages of small volume, good flexibility, easy to carry, flexible, and convenient to move, which is conducive to the power field operation and use. It is ideal equipment in the high and low voltage electrical appliance industry, which improves the working efficiency of the electrical industry and is welcomed by the industry. The portable busbar machine has three processing units: punching, shearing, and bending, which can be respectively used for punching, shearing, and bending of the busbar. By adjusting the quick-change connector, the three units can be switched between each other. Users can punch, cut, and bend the busbar as long as they select the corresponding machining unit.
Before using the portable busbar machine
Check whether the plug and power line is normal. Turn on the power supply and turn on the power switch (green on / red off). It is not necessary to turn off the switch during normal operation. Please cut off the power when it is not working. When punching and cutting, the portable busbar machine can operate according to the limit device on the working table of the unit. You can adjust the limit device, and then the workpiece will lean on the limit device to ensure the working punching or cutting size.
When you are using punching, please turn the reversing handle to the position marked with “punching”; after using punching, turn the handle to the position of the oil return label.
When you are using the cutting exhaust, please turn the reversing handle to the position marked with the words of cutting; after using the cutting, turn the handle to the position of the oil return label.
When you are using the bent row, please turn the reversing handle to the position marked with the words “bent”; after using the bent row, turn the handle to the oil return label position.
When using, put the quick connector on the quick head of each unit of the equipped hydraulic system, plug in the power supply, wait for the motor to rotate for 1-2 minutes, and step on the footswitch. At this time, the output hydraulic oil will carry out various work, and the output hydraulic oil will selfly pressurize with the increase of load. Step on the pedal switch in the opposite direction to return. When the hydraulic oil return is completed, the work is finished.
|Item||Model||Function||Working table size||Input voltage||Cutting range (mm)||Horizontal bending||Horizontal bending angle||Standard|
|Portable Busbar machine||30A||cutting, punching bending||700mm(L)*700mm(W)*1100mm(H)||50Hz, 220V or customized||busbar ≤ 150*10||busbar ≤ 150*10||0° -135°||ф6.5mm、|
ф10.5mm、ф13.5mm ф17.5mm ф20.5mm
You can also check other same machines：