Wow!303E-3 busbar bending cutting punching machine for sale

Contact Us

descriptionparametercontact us
 For this 303E-3 busbar bending cutting punching machine  the main characteristics are: Cutting,punching (all kinds of round,oval,square,special holes and slot holes),horizontal bending, chamfering,vertical bending,embossing ,twisting,anti-pressing, pressing cable thread, flattening the copper,aluminum busbar. The copper cut punch shear machine mainly for the line of copper processing,HV and LV switchgear,transformer,elevator,boiler,electric car etc.This electricity busbar machine bending controlled by PLC.cutting no waste.punching by 4 holes,6 holes or 8 holes turrent punch set which you can choose according your need,price all the same.The busbar processor machine bending is closed bending,then will be not open bending will make upper and down angle different on same bend.

303E-3 busbar bending cutting punching machine
303E-3 busbar bending cutting punching machine

Function introduction of the copper cut punch shear machine  :

 

 

1.Cutting unit double-column structure (patent number: ZL201120262802.1).Cutting mouth flat,and no burr and no waste.

 

2.Punching unit using Nodular cast iron.4 and 6 and 8 molds position turrent punching structure is a totally whole one. concentric degree of molds is higher,it is longer service life of the molds,saving changing time of molds.

 

3.Bending unit uses closed bending structure,making it is more fastness when processing bends. Also longer of the service life.

 

4.Bending unit uses double work table,achieved a real sense of the three working stations at the same time while working without impacting each other.

 

5.Adopting PLC controlled,compared with the traditional relay,it is more stable and reliable.

 

6.Three units of the 303E-3 busbar bending cutting punching machine can work synchronously, each other, not affecting,make  the processing efficiency higher.

 

7.Hydraulic tank with thick well welded plate ,and is treated by parkerising,then hydraulic oil can be longer time used and will  be not degenerated then.

The Parameter of the electricity busbar machine:

 

            ItemDGWMX303E-3
Max. Punching Force (KN)300
Punching Diameter Range (MM)Φ4.3-25
Max. ProcessThickness (MM)12×160
Max. Vertical Bending Width (MM)120
Work Bench Size(MM)First worktable:1500×1200

Second worktable:940×420

Size Of The Machine (MM)1750×1350×1500
Weight Of The Machine(KG)1390
Bending Angle CncNO
The Three Units Work At The Same Time

 

YES

The video:

bending :

cutting

punching

 

 

If need busway machines or busbar machines :

 

If need busbar cutting machine  :                                 If need busbar bending machine

602K                                                                                     NC.40Z-2000

303E-3-S                                                                             303C 

Punch press                                                                         busbar straightener

303C-3

 

Summary
Review Date
Reviewed Item
Wow!303E-3 busbar bending cutting punching machine for sale
Author Rating
51star1star1star1star1star

留下评论

This site is protected by wp-copyrightpro.com

Translate »
WhatsApp chat