The busbar punching cutting and bending machine developed and produced by the multifunctional 3 in 1 busbar machine manufacturer has three working units. Punching, cutting and bending, and the working stroke of each unit can be easily adjusted. Using this machine, you can process copper-aluminum bus bars of different specifications. With the corresponding processing unit, you can cut, punch (round holes, waist-shaped holes), flatten and bend the copper-aluminum bus bars quickly and easily. , Embossing, flattening, twisting, crimping cable joints, and other different processing. By changing the mold, it can also complete flattening, twisting, crimping of cable joints, cutting, flattening, punching, and bending of copper rods.
Advantages of the new hydraulic busbar machine. The equipment design is humanized, the operation is convenient, and the production efficiency is significantly higher than that of the traditional busbar punching cutting and bending machine.
- This series of busbar punching cutting and bending machines has three working units. Punching, cutting, and bending. The units are convenient to adjust, shorten the processing time, and greatly improve the work efficiency.
- Use the corresponding processing unit to punch, cut, and bend copper bus bars and aluminum bus bars.
- Complete the processing of various specifications of bus bars and meet various processing needs by changing different molds.
- There is an accurate measuring ruler on each workbench, which is more conducive to the precise processing of the busbar.
- Each working unit has a footswitch and a button switch to make the operation more convenient and quick.
- There are four casters on each busbar punching cutting and bending machine for easy movement.
Interpretation of punching of multifunctional 3 in 1 busbar machine.
- The punching unit adopts thimble design: it is firm and stable during processing, and the processed workpiece is more accurate.
- Turret-type punching dies table, adopts the tooth-shaped six-position integral turntable to ensure the absolute centering of the upper and lower molds. Improve the concentricity of the mold, and extend the service life of the mold.
- The turntable adopts tooth structure: good sightline and high strength.
- There is no need to change the mold frequently during work, just switch the mold at any time according to the processing requirements. Avoid the waste of time changing molds one by one, optimize the punching workflow, and the production efficiency is significantly higher than traditional punching units.
5. Using polyurethane pad + spring design: make the mold return faster.
- The punching unit of this series of busbar punching cutting and bending machines adopts two operation modes including manual button and footswitch, which is clear at a glance, simple and fast.
- The use of an accurate 60mm large diameter hydraulic column in the industry: makes the punching force more stable and powerful, and the production effect is better.
Interpretation of multifunctional new hydraulic busbar machine.
- Use universal file-cutting cutting: the cutting mouth is flat, no corners, no burrs, beautiful appearance; no waste in cutting.
- Using an elastic polyurethane pad, better-cutting effect of the processed workpiece.
- This series of multifunctional bus processing machines adopts two operation modes including manual button and footswitch, which is clear at a glance, simple and fast.
Interpretation of bending of multi-function busbar punching cutting and bending machine.
- The bending unit of the advanced bus processing machine adopts an independent workbench, and the three processing units can work at the same time without affecting each other. The ordinary busbar punching cutting and the bending machine has only one workbench and cannot work at the same time.
- By changing the bending mold, the busbar bending and vertical bending can be completed quickly.
- The bending angle of the advanced new hydraulic busbar machine is controlled by CNC, imported PLC control, directly input the thickness and angle of the copper bar on the CNC touch screen. Or input the height and side length to directly process the required workpiece.
The CNC bending accuracy is ±1°, and the repeatability accuracy is ±3°.
The data of the workpiece processed by the 3 in 1 busbar machine can be stored in the system at any time so that it can be called repeatedly in future processing.
The bending unit of ordinary 3 in 1 busbar machine is non-CNC.
- The bending unit adopts horizontal processing, which is safe and convenient
- Closed overall frame structure: the bending and embossing of copper and aluminum busbars are more uniform, and the service life is prolonged.
- Bending die with 45# steel heat treatment: super hardness, durable.
- This series of multi-station 3 in 1 busbar machine adopts two operation modes including manual button and footswitch, which is clear at a glance, simple and fast.
Selection of accessories for multi-function CNC busbar machine.
Motor: juliweite 3×4/5.5KW
Gear pump: Taiwan Xinhong
Solenoid valve: Shanghai Fengyi
Overflow valve: Shanghai Fengyi
Relay: Shanghai Schneider
Contactor: Shanghai Schneider
Display screen: panel master or Panasonic
Multifunctional new hydraulic busbar machine delivery configuration:
Punching die: Φ7, Φ9, Φ11, Φ13, Φ17, Φ13×18, Φ21, Φ17×21, optional eight sets
Flat bending mold: two sets of R5, R10 or R3
Vertical bending mold: a set of R80
Embossing mold set
Shearing knife set (on the device)
Punching unit turret station 4, 6, 8 can be customized Other random accessories please see the packing configuration list